Skip to content

Stove Heating Element

High quality circles stainless steel electric stove parts electric heating element The Stove Heating Tube, those metal components that get red-hot and generate heat, are the most important parts of Electric Stove. When the elements fail to heat properly, it’s time to replace them. It’s a simple procedure any electric stove owner can easily accomplish in a few minutes’ time. You can usually identify a burnt-out element by blistering or small holes on the element’s coils. A burner that plugs into a receptacle is easy to test, just unplug the non-heating burner, plug it into another working receptacle, restore the power to the range, and test it. Do not be alarmed if a new element smokes a little when you first use it. This is a factory-applied green coating, that prevents scratches during shipment, burning away.
Highly recommended products from  Air other series:
Category:

Description

What is a stove heating element? The stove heating element is an tubular heating element with double-headed outlets.
The metal pipe is used as a protective casing, and a spiral high-quality electrothermal alloy wire (nickel-chromium, iron-chromium alloy heating wire) is uniformly distributed along the central axis of the pipe, and is closely packed in the gap portion.
Crystalline magnesia powder with good heat resistance, thermal conductivity and insulation.
The ends of the nozzle are sealed with silica gel and processed by other processes. It can be made into U shape, m type, flange type, mosquito coil type, ring shape and the like. According to the different use state, safety and installation requirements of the electric heating pipe, the electric heating pipe also includes other structures such as a sealing structure, a structure of a terminal portion, a flange, a temperature control or a fuse.

Design & Diagram

If you need to customize a similar product, please provide the drawings or the following information:

  1. Material, length, diameter (tube diameter and fin forming diameter)4 coil Stove heating element
  2. Fin thickness and spacing
  3. Voltage power
  4. Working environment and temperature (important)
  5. The type and material of the terminal
  6. Detailed drawings of other special configurations
  7. Test standards and technical requirements

Precautions

  1. The stove heating element should be stored outside the dry. If the insulation resistance drops below 1 megohm due to long-term placement, it can be dried in an oven at about 200 °C for several hours (or the component is low pressure for several hours), ie, the insulation is restored. resistance;
  2. When it is found that the surface of the pipe has carbon deposits, it must be used after being removed to avoid reducing the efficiency and even burning the components;
  3. When melting solid oil such as asphalt and paraffin, the voltage should be reduced. After melting, it should be raised to the rated voltage to prevent the power from concentrating and reducing the service life of the components.

Shopping & Shipping

Thermoer offers high quality Stove heating elemnt. Decades of freight experience, safe and complete delivery of goods to customers is our commitment.
The products below are suitable for different types of electric Stove.
Please contact us to purchase.
More discounts, More services

Three Rings Mosquito Coil Type Stove Surface Heater
$12 $10.5
  • Material: Stainless
  • Power:1200 Watt
  • Voltage: 220 Volt
  • Pipe diameter: 6.6 mm
$12 $10.5
304 Stainless Pancake Coil Shape Heater Tube For Stove Surface
$12 $11
  • Pipe material: Stainless 304
  • Power:1800 Watt
  • Voltage: 220 Volt
  • Pipe diameter: 6.6 mm
  • Main application: Air heating
$12 $11
5 Coils Heating Element Without Tripod For Stove
$13 $12
  • Material: Stainless
  • Power: 2000 Watt
  • Voltage: 220 Volt
  • Pipe diameter: 6.6 mm
  • Main application: Air heating
$13 $12
5 Rings Mosquito Coil Type Heater Tube With Tripod
$13 $12
  • Material: Stainless
  • Power: 2000 Watt
  • Voltage: 220 Volt
  • Pipe diameter: 6.6 mm
$13 $12

Specifications

Parameter Details
Shell material stainless steel, stainless steel + waterproof scale coating
Fastener material stainless steel, etc.
Electric heating wire material 0Cr25Al5, 0Cr21Al6Nb, 0Cr27Al7Mo2, Cr20Ni80, etc.
Insulating filler insulating magnesium oxide powder, etc.
Rated voltage 110V, 220V, 380V, etc., can be customized non-standard;
Power determined according to the use environment. The power error is +5%~0% in the cold state, and the voltage power can be customized according to your requirements.
Pipe diameter The normal range of pipe diameter: 6~20mm, the most used are: 6mm, 6.5mm, 7mm, 8mm, 8.5mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm
Length according to customer requirements
Cold insulation resistance the cold insulation resistance should not be less than 50MΩ when leaving the factory inspection; after the sealing test, the insulation resistance after long-term storage or use should be no less than 1MΩ
Cold leakage current ≤ 0.5 mA
Cold insulation 1600v. 1/seg

 

Advantages

  1. 1.High safety: No spark, no naked fire, highly insulated, the radiation of the harmony 

  2. Low cost with long service life and high efficiency

  3. Shorter process time.

  4. Lower power needed.

  5. No contamination from dust: No convection needed. Heater is not harmful to human bodies.

  6. Easy installation.

Features

  • Electric Heating Tubes are widely used to heat liquids, air or metals as a reliable, economical, and versatile way.
  • Electric Heating Tubes are constructed using a copper, steel, stainless steel, or Incoloy sheath material,and the service life is very long.
  • We offer different tube diameters like 6 mm, 8 mm, 11 mm, 12.5mm, 16mm & 18mm and so on.

Application

  • Hot runner systems : Heating of manifolds
  • Packaging industry : Heating of cutting bars, hot stamps
  • Laboratories : Heating of analytical equipment
  • Medical: Dialysis, Sterilization, Blood Analyzer, Nebulizer, Blood/Fluid Warmer, Temperature Therapy
  • Telecommunications: Deicing, Enclosure Heater
  • Transportation: Oil/Block Heater, Aircraft Coffee Pot Heaters,
  • Food Service: Steamers, Dish Washers,
  • Industrial: Packaging Equipment, Hole Punches, Hot Stamp.

Q&A

  1. How much does a heating element cost for a stove?
    An oven element will cost you on average a cheap $15 to $25 dollars, possibly less. This task should take about 20 minutes in total. Doing this yourself will save you hundreds of dollars instead of calling an appliance repair company. You will first notice that your oven is not heating properly.
  2. What causes a heating element to burn out?
    Eventually, all heating elements (like light bulbs) will burn out. Older elements mayburn out due to age or, more often, sediment build up from water conditions encrust the element blades acting as insulation and preventing the heat from being transferred to the water. The element thus overheats and burns out.
  3. What are stove top heating elements made of?
    Electric current through the element encounters resistance, resulting in heating of theelement. Most heating elements use Nichrome 80/20 (80% nickel, 20% chromium) wire, ribbon, or strip.
  4. Why Nichrome wire is used as a heating element?
    Nichrome wire is used as a heating element because it is very stable, even at high temperatures. Unlike other metals, it will not melt even when generating large amounts of heat. Ironically, nichrome actually has low electrical resistance, the property that causes the wire to heat.

Replace & Install

If you are a personal user, when your Electric Stove broken, Replacing the heating element can solve the problem in time.

Recommend the following replacement video to you.

Scroll To Top